Fasteners

• Befæstelse til montage af tag- og facadeprofiler
• Skruer til både træ- og stålkonstruktioner
• Montageskruer med EPDM-tætningsskive
• Varianter til træunderlag, stålunderlag, sideoverlæg og lysplader
• Udvalgte skruer med 19 mm tætningsskive
• Fås i galvaniseret stål og rustfri A2
• Fås med lakeret eller blankt hoved afhængig af variant
• Fås med 6-kant eller Torx afhængig af variant
• Flere dimensioner fra 4,2 mm til 6,5 mm
• Boreevne afhænger af skruetype og underlag
• Leveres i pakker med typisk 100, 250 eller 500 stk.
• Udvalgte varianter lagerføres i flere farver
• Omfatter også popnitter og åsebefæstelse

Produktkatalog

The right screw ensures that the roof or façade profile is correctly secured to the substrate. This affects the weathertightness, strength and service life of the finished solution.

Screws for timber and steel are designed for different substrates. The screw type must therefore always be selected according to the structure on which the profiles are installed, ensuring that the screw provides the correct grip and performance.

Stainless steel fasteners may be suitable for environments where greater corrosion resistance is required. The choice depends on the building’s location, exposure to its surroundings and the specific solution.

No, not necessarily. The choice of fasteners depends on the profile type, supporting structure and installation conditions. Fasteners should therefore always be selected according to the specific roof or façade solution.

The correct installation method depends on both the profile and the fasteners. Always use DS Stålprofil’s installation guides as a basis, or contact DS Stålprofil if you are unsure about the choice or installation method.