Top-hat sections

• Standardlængde: 3.000 mm
• Standardgodstykkelse: 1,0, 1,5 og 2,0 mm
• Fås som Hatteprofil og Ventileret Hatteprofil
• Korrosionsbestandighed: C2 eller C4 afhængig af variant
• Materiale/overflade: Galvaniseret, aluzink AZ 185 eller zinkmagnesium 310 afhængig af variant
• Profilbredde: 50 mm topflade
• Sideflanger: 29 mm
• Ventileret variant med 45 mm profilbredde

Produktkatalog

Top-hat profiles are used as a substrate for wall cladding where a flat and stable surface is required behind the façade cladding.

A level substructure helps minimise the risk of stress bulges in the finished cladding and provides a more uniform visual result.

Top-hat profiles are suitable when the wall cladding requires an even and stable substrate, for example in façade solutions where the finish and precise installation are particularly important.

You should choose a ventilated top-hat profile when the façade structure requires ventilation behind the cladding. The ventilated profile promotes air circulation within the cavity and can help channel moisture and condensation away from the structure.