Strong roof and façade solutions for farmhouses, agricultural facilities and recreational properties

For decades steel has been a financially attractive alternative in agricultural buildings. Ever since the first rib sheet made from galvanised steel was introduced in Germany, the possibilities with using steel have developed very rapidly. Today, there are good financial, functional and architectural reasons for covering agricultural buildings, farmhouses and recreational properties with thin plate steel on roofs and façades. Time is also an important factor. Installing thin plate steel is much faster than any other roof or façade material. Fewer craftsman hours means money saved – and increases cost-effectiveness.

There are many excellent reasons to why you should consider steel in your agricultural building

Above all else, an agricultural building should be strong, functional and profitable. Three requirements that are fully met with thin plate steel. But the list of benefits is much longer than that.

Great strength

Steel is a very strong material. Steel profiles on roofs and façades withstand most effects from the weather and the daily use of your building.

Long lifetime

A quality cladding made from thin plate steel ensures a sealed building envelope for up to 50 years. You also get a full warranty for up to 30 years on our products.

Easy maintenance

The exterior maintenance of your agricultural buildings is easy and does not take up a lot of time. To clean the cladding, simply use water as needed.

High cost-effectiveness

Agricultural buildings with thin plate steel are characterised by an attractive overall economy, among other things because the price per square metre is far cheaper compared to other roof and façade solutions.

Wide choice of profiles and colours

Thanks to our numerous panel profiles, it is easy to get the right look. In addition, you can choose from a wide range of both traditional and more striking colours.

High degree of design freedom

Thin plate steel can be cut and bent in accordance with specific requirements. Therefore architecturally, there are few limitations when you want to clad your roof and façade with steel.

Functional properties

You can choose between many different types of coatings with different properties, as needed. For example, colour fastness, corrosion value, scratch resistance.

Complete range of accessories, incl. gutters

To ensure that you get an attractive and functional roof and façade solution, we provide a comprehensive range of flashing, seals, light panels, gutters, etc.

Short delivery time

Profile sheets, sealing accessories and flashing is manufactured at our ultra-modern factory in Hobro. This ensures that you get short delivery times – even for special orders.

Fast installation

Time is money. Therefore, it is a great financial advantage that the installation of the steel sheets requires fewer craftsman working hours compared to other roof and façade materials.

1
Great strength
Steel is a very strong material. Steel profiles on roofs and façades withstand most effects from the weather and the daily use of your building.
2
Long lifetime
A quality cladding made from thin plate steel ensures a sealed building envelope for up to 50 years. You also get a full warranty for up to 30 years on our products.
3
Easy maintenance
The exterior maintenance of your agricultural buildings is easy and does not take up a lot of time. To clean the cladding, simply use water as needed.
4
High cost-effectiveness
Agricultural buildings with thin plate steel are characterised by an attractive overall economy, among other things because the price per square metre is far cheaper compared to other roof and façade solutions.
5
Wide choice of profiles and colours
Thanks to our numerous panel profiles, it is easy to get the right look. In addition, you can choose from a wide range of both traditional and more striking colours.
6
High degree of design freedom
Thin plate steel can be cut and bent in accordance with specific requirements. Therefore architecturally, there are few limitations when you want to clad your roof and façade with steel.
7
Functional properties
You can choose between many different types of coatings with different properties, as needed. For example, colour fastness, corrosion value, scratch resistance.
8
Complete range of accessories, incl. gutters
To ensure that you get an attractive and functional roof and façade solution, we provide a comprehensive range of flashing, seals, light panels, gutters, etc.
9
Short delivery time
Profile sheets, sealing accessories and flashing is manufactured at our ultra-modern factory in Hobro. This ensures that you get short delivery times – even for special orders.
10
Fast installation
Time is money. Therefore, it is a great financial advantage that the installation of the steel sheets requires fewer craftsman working hours compared to other roof and façade materials.

See our excellent references

Does an agricultural building have to look boring?

Our comprehensive range of profiles, coatings and colours provides a high degree of design freedom and thus the possibility of creating buildings with a completely different aesthetic appeal compared to just a few years ago. At DS Stålprofil, you can also choose between coatings with different UV classes. For a very small additional price, you can therefore ensure that your buildings’ roofs and façades remain attractive without changing colour over the years.

Find inspiration

DropStop ensures your roof is always dry

If you are erecting an uninsulated roof, we recommend that you order your profile sheets with our unique anti-condensation felt, DropStop, on the underside. This will effectively prevent condensate from dripping from the sheets and down into the underlying structure.

Learn more about DropStop

The strongest warranty on the market

Our warranty provides you with full cover for 30 years. This means that unlike other manufacturers, we do not depreciate warranty coverage over time. If you are erecting a building in a coastal area, we provide coverage all the way to the coastline. In general, we recommend that you read the warranty terms and conditions (small print as well), regardless of your steel sheet supplier.

Advice and calculations

Our service concept provides you with free access to a large number of services, including:

Choice of optimal product
Choice of optimal surface coating
Measurement at the construction site
Detailed installation plans
Static calculations
Detailed solutions

Contact a consultant

Made in Denmark

We are the only supplier of steel profiles for roofs and façades who manufactures at its own factory in Denmark. This ensures the shortest possible delivery times for both steel sheets and accessories, regardless of the size of the order. We also deliver using our own drivers and supply the material in strong packaging, so you avoid any transport damage and resulting delays.

Learn more about DS Stålprofil

DEALER

Find your nearest DS Stålprofil product range dealer

Find a dealer

ADVICE

Our consultants are ready to offer advice and to help you

Contact a consultant