Trapezoidal sheet 20-115 VP

• Profilhøjde: 18 mm
• Dækbredde: 1.030 mm
• Pladebredde: 1.080 mm
• Maks. pladelængde: 12.000 mm
• Godstykkelser: 0,40, 0,50, 0,60 og 0,75 mm
• Vægt pr. m²: 4,40-7,05 kg afhængigt af godstykkelse
• Vejledende lægteafstand: 1.000-1.600 mm afhængigt af godstykkelse
• Tolerancer: +/- 10 mm
• Montageretning: fra venstre mod højre
• Minimum taghældning: 5°
• Ved taghældning under 10° anbefales montage med dobbelt sideoverlæg
• Skruer pr. m²: 8 stk. ved vægmontage
• Kan udføres med bæreben for hurtigere montage, tæt sideoverlæg og korrekt montage af overlapskrue

Montagevejledning – Trapezplader

Spændtabeller – Trapezplade 20-115 VP

Produktkatalog

Farvekort

Premium farvekort

Trapezoidal Sheet 20-115 is a low, simple trapezoidal profile with an understated appearance. The other trapezoidal sheets differ in areas such as profile height, cover width and load-bearing capacity. In general, higher profiles may be suitable for longer spans or greater strength requirements, while lower profiles are often chosen when a lighter and more discreet solution is desired.

The cover width is the width covered by the sheet when installed with the correct overlap. Trapezoidal Sheet 20-115 has a cover width of 1,030 mm, which is used when taking measurements and calculating material requirements.

The material thickness is selected based on the structure, span, load and application. The product catalogue specifies several material thicknesses for Trapezoidal Sheet 20-115, but the specific choice should always be based on the project’s requirements and installation conditions.