Trapezoidal Sheet 45-333 S

• Profilhøjde: 42 mm
• Dækbredde: 1.000 mm
• Pladebredde: 1.070 mm
• Maks. pladelængde: 14.000 mm
• Godstykkelser: 0,50, 0,60 og 0,75 mm
• Vægt pr. m²: 4,92-7,38 kg afhængigt af godstykkelse
• Tolerancer: +/- 10 mm
• Montageretning: fra venstre mod højre
• Minimum taghældning: 3°
• Ved taghældning under 10° anbefales montage med dobbelt sideoverlæg
• Skruer pr. m²: 6 stk. ved tagmontage og 7 stk. ved vægmontage
• Kan udføres med bæreben for hurtigere montage, tæt sideoverlæg og korrekt montage af overlapskrue

Montagevejledning – Trapezplader

Spændtabeller – Trapezplade 45-333 S

Produktkatalog

Farvekort

Premium farvekort

Trapezoidal Sheet 45-333 S is the strongest trapezoidal profile in the range. It has the highest profile, is available in lengths of up to 14,000 mm and can be used with a minimum roof pitch of 3°. It is therefore suitable when extra strength, longer sheets and a robust roofing or façade solution are required.

A watertight side lap means that the profile’s side lap is designed to provide a tight seal between the sheets. This is particularly important for roofing solutions, where correct installation and watertightness are essential.

The profile is a good choice for buildings with large roof or façade surfaces where high load-bearing capacity, operational reliability and the option of wider spacing between supports are required.

The support leg can help ensure faster installation, a tight side lap and correct positioning of the overlap screw.