Trapezoidal sheet 35-206 VP

• Profilhøjde: 34 mm
• Dækbredde: 1.030 mm
• Pladebredde: 1.080 mm
• Maks. pladelængde: 12.000 mm
• Godstykkelser: 0,50, 0,60 og 0,75 mm
• Vægt pr. m²: 4,72-7,05 kg afhængigt af godstykkelse
• Vejledende lægteafstand: 1.350-1.500 mm afhængigt af godstykkelse
• Tolerancer: +/- 10 mm
• Montageretning: fra venstre mod højre
• Skruer pr. m²: 7 stk. ved vægmontage

Montagevejledning – Trapezplader

Spændtabeller – Trapezplade 35-206 VP

Produktkatalog

Farvekort

Premium farvekort

Trapezoidal Sheet 35-206 is a strong, medium-depth profile with a good cover width and watertight side lap. It has a higher profile than the low trapezoidal sheets and is less heavy-duty than 45-333 S, which is typically chosen when greater load-bearing capacity and span are required. This makes 35-206 a good choice when you need a robust and efficient profile for roofs, facades or ceilings.

A watertight side lap means that the profile’s side lap is designed to ensure a tight seal between the sheets. This is particularly relevant for roofing solutions, where correct installation and watertightness are essential.

The profile height affects the sheet’s strength, appearance and application. A higher profile typically provides greater load-bearing capacity and a more distinctive visual appearance, while lower profiles are often chosen for lighter and more discreet solutions.

Both profiles are among the stronger options in the trapezoidal sheet range, but they differ in areas including cover width, sheet width, weight and the number of screws required. The choice therefore depends on the project’s requirements for construction, installation, appearance and material consumption.