Trapezoidal Sheet 35-190 TP

• Profilhøjde: 35 mm
• Dækbredde: 950 mm
• Pladebredde: 1.030 mm
• Maks. pladelængde: 12.000 mm
• Godstykkelser: 0,50, 0,60 og 0,75 mm
• Vægt pr. m²: 5,12-7,65 kg afhængigt af godstykkelse
• Vejledende lægteafstand: 1.400-1.600 mm afhængigt af godstykkelse
• Tolerancer: +/- 10 mm
• Montageretning: fra venstre mod højre
• Minimum taghældning: 5°
• Ved taghældning under 10° anbefales montage med dobbelt sideoverlæg
• Skruer pr. m²: 5 stk. ved tagmontage
• Kan udføres med bæreben for hurtigere montage, tæt sideoverlæg og korrekt montage af overlapskrue

Montagevejledning – Trapezplader

Spændtabeller – Trapezplade 35-190 TP

Produktkatalog

Farvekort

Premium farvekort

Trapezoidal Sheet 35-190 is a strong mid-range profile in the trapezoidal sheet range. It has a higher profile than low trapezoidal sheets such as 20-115 and 25-275R, providing greater strength and a more distinctive appearance. At the same time, it is less robust than the tallest trapezoidal profiles, such as 35-206 and 45-333 S, which are typically chosen when longer spans or a higher load-bearing capacity are required. Therefore, 35-190 is a good choice when you want a strong and reliable trapezoidal sheet but do not require the profile with the highest load-bearing capacity in the range.

Trapezoidal Sheet 35-190 is a good choice for roofs requiring a stronger profile with good spanning capability, while still providing a simple, efficient solution that is quick to install.

The profile height affects the sheet’s strength, appearance and application. A higher profile typically provides greater load-bearing capacity and a more distinctive visual appearance, while lower profiles are often chosen for lighter and more discreet solutions.

The choice depends on the span, load, type of building and desired appearance. If the project has particularly high load-bearing requirements, a taller trapezoidal profile may be appropriate. If you want a strong yet relatively simple profile, 35-190 is often an ideal choice.